手電筒用英語怎么說嗎
手電筒用英語怎么說嗎
雖然現在手電筒的使用已經沒那么廣泛了，但是作為以前它可是大大方便了我們的生活呢，今天學習啦小編在這里為大家介紹手電筒用英語怎么說，歡迎大家閱讀！
手電筒的英語說法
flashlight
electric torch
手電筒相關英語表達
手電筒電池 flashlight battery
微型手電筒 mini flashlight
強光手電筒 Glare flashlight
手電筒的英語例句
1. She froze when the beam of the flashlight struck her.
當手電筒的光照到她身上時她僵住了。
2. Stopping to rest, Pete shut off the flash.
皮特關掉手電筒，停下來休息。
3. Shine the torch on the lock while I try to get the key in.
我插鑰匙時，請用手電筒照著鎖頭。
4. The burglar shone his torch into the dark room.
盜賊將手電筒照進黑暗的房間.
5. Shine the torch on so that we can read the labels.
用手電筒照這個標簽,我們好看得見.
6. I saw the sudden flare of a flashlight in the darkness.
我看到手電筒在黑暗中突然閃出的亮光.
7. Flash your light about and see if anyone is hiding here.
用手電筒四周照照,看看是否有人藏在這里.
8. He flashed a torch to guide me.
他用手電筒為我引路.
9. Shine the torch up into the rafters, please.
請用手電筒照房椽.
10. Most flashlights work on two batteries.
大多數的手電筒用兩節電池.
11. Suddenly somebody flashed an electric torch.
手電筒霍然一亮.
12. A flashlight beam probed the underbrush only yards away from their hiding place.
一束手電筒的光束在離他們的藏身之地只有幾碼遠的灌木叢里搜尋著。
13. The torchlight swung across the little beach and out over the water, searching.
手電筒的光在小海灘上掃過，而后照向水面搜索著。
14. I could see the beam of his flashlight waving around in the dark.
我可以看到他的手電筒光在黑暗中上下舞動.
15. His flashlight was still clipped to his belt.
他的手電筒還別在皮帶上。
手電筒英文閱讀帶翻譯
How to turn a Minimag flashlight into a burning laser! CAUTION! As you know lasers can be dangerous. Never point them at any living object!
注意了，如何使一個小小的手電筒變成一個激光燈?你知道激光燈是一個危險的道具，千萬不要用它指著任何活物。
Step 1: Take Apart Your DVD Burner
第一步，拆開DVD刻錄機
First you'll need a 16X DVD burner.I'm using a LG that I had as a spare. Remove all the screws and take apart the case.
首先需要一個16X的刻錄機。我自己使用的是一個LG牌子的刻錄機，還有一個備用的。去掉所有的東西，只要這個小盒子。
Remove the drawer to expose the carriage assembly. That's where you will find the powerfull laser diod.
去掉外殼之后你會發現激光直撥外線。
Step 2: Remove The Laser Diod
第二步，取下激光外線
All DVD burners will have a set of rails that the laser assembly rides on.
所有的刻錄機都有一組插孔，激光裝置就插在上面。
After pulling out the assembly, start removing all the little screws to get to the laser diod. Be careful because the diod is a fragile electronic component.
拔出這個裝置，取下所有的零部件以找到激光外線。要小心，因?yàn)檫@個外線是易碎的電子元件。
Step 3: Disassemble An AixiZ Laser Housing
第三步，拆開激光裝置
Then you'll need to pick up an AixiZ laser housing.You will have to disassemble it and also remove the laser that comes in the housing.
拿起激光裝置在的部件，拆分，并使激光發光部件分離。
I used the back end of an exacto knife handle and gently tapped out the existing laser diod.
我用刀子的刀背挑出DVD中的激光外線。
Step 4: Install The Laser Into The New Housing
第四，將取出的外線裝置移植到新地方
Then you're going to carefully install the DVD laser into the new laser housing. You're almost done.
小心將DVD激光放置到新的基架上，就基本完成了。
Step 5: Connect Up Your Laser Diod
第五步，連接激光外線
All DVD laser diods use a similar configuration. Be sure to test your polarity using two AA batteries.
所有的DVD激光外線都有類似的配置，用兩節AA電池測試輸出電壓。
Then you're going to solder two longer pins onto the positive and negative terminals onto laser diod.
然后將長插腳兩端焊接在外線的兩極上。
Step 6: Add The Laser To The Mag Lite
把激光與手電筒相連。
Disassemble your Mag Lite, removing the ring, the inside reflector and of course, the bulb.
拆開手電筒，移除彈簧、內置鏡和燈泡。
We'll need to drill out the existing reflector so it sits around the laser housing.
需要穿過反射器，這樣激光能處在反射器中間。
Step 7: Test It For Yourself
第七，親自試驗一番
Now put everything back together.Load your two AA batteries,And here are the test results.
現在將所有的東西組組裝起來，裝上兩節AA電池，然后你就能看到結果了。
Your new burning laser pointer easily lights a match and pops a balloon in an instant. That's how you turn a mini-mag flashlight to a powerful burning laser pointer.
這個激光束輕易就點燃了火柴，燒投了氣球。這就是改造手電筒成激光的神奇過程。
猜你喜歡：