工位用英語怎么說
工位用英語怎么說
工位是生產過程最基本的生產單元，在工位上安排人員、設備、原料工具進行生產裝配。你知道工位用英語怎么說嗎?現在跟學習啦小編一起學習關于工位的英語知識吧。
工位英語說法
station
working position
wright
工位的相關表達
水洗工位 Wash station
焊接工位 welding post
四工位 Four engineering location ; four-station
雙工位 Double Stations working ; two working station ; double work
原有工位 The original station ; The original position
噴涂工位 Spraying position ; Spraying station ; spray-painting the speaker
耐壓工位 pressure resistant position ; Pressure station
機械工位 Working Position
噴漆工位 Paint spraying section
工位的英語例句
1. The total of stents can satisfy matching, complex operation requirement Labour.
多種支架的選配, 總能滿足復雜工位的操作要求.
2. The positions are approached directly using the distance to - go display.
使用剩余移動量顯示功能可直接趨近工位.
3. Three standard station can realise handle and grooves processing. angle cutting, link - pole.
標準三個工位,可實現執手空槽沖壓,尖角切割, 連桿空槽沖壓.
4. Sitting in a cubicle is'stupefying'and isolating, only a social need.
在工位上坐著令人麻木、與世隔絕 ﹐ 只會讓人更加渴望社交.
5. There are two a total of 88 media workers in the workplace.
這里有兩個共88個工位的媒體工作間.
6. Sophisticated multi - sectional professional facility, for more abundant products category.
先進的多工位專業設備, 為客戶提供更豐富的產品.
7. Ensure the desired level of workstation readiness for start - up.
確保啟動階段工位準備所需達到的水平.
8. The hooks rotate on three points, that makes less dead - angle of shot - blast.
吊鉤在三個工位上自轉, 減少拋射死角.
9. Spot fork lift pocket add the fixing position plate.
點叉槽工位加裝定位擋板.
10. The coupling factor among each stage was obtained by experiment results.
用實驗方法求取各工位之間的耦合系數.
11. The paper introduced the loader of multi - station tire shaping and curing press.
介紹了多胎液壓式或機械直動式定型硫化機組合的多工位裝胎機構.
12. Applicable on rotating and sliding vertical injection molding machine.
轉盤機或滑板機等多工位成型中水口料頭之夾取.
13. Chapter 5, case retrieval and reuse for MSMT are studied.
第五章研究了多工位機床事例的檢索與重用方法.
14. Task Air - Conditioning ( TAC ) is an innovation, and energy - use analysis is not available.
工位 空調系統 是對傳統空調方式的革新, 但是在能耗分析方面的研究比較少.
15. Sitting in a cubicle is stupefying and isolating, only a social need.
在工位上坐著令人麻木、與世隔絕, 只會讓人更加渴望社交.
猜你喜歡：